Page 2 of 4

Posted: Tue Jun 14, 2005 2:15 pm
by John
Question for you all, why use wooden dowel and a PVC pipe, why not just use the wooden dowel?

Posted: Tue Jun 14, 2005 2:24 pm
by Rik
The size wooden dowel that fits inside the 3/4" PVC is not nearly strong enough on its own. You'd probably have to go way up in size, over an inch, to use just the dowel. That 50 cent dowel inside that 50 cent piece of PVC makes for a pretty stiff stakeout pole.

Or you could get some fancy wood stick from a far away land, burnish it up nicely with a torch, wrap a bit of leather lacing around the grip and use that. It could also be a very nice pointing device.

Neither the PVC pipe or wooden dowel are stong enough on their own. Together, it is indestructible (how's that for a prove me wrong challenge?)

Posted: Tue Jun 14, 2005 2:32 pm
by Todd
Time for me to chime in, could not stand it any longer.

Now I did not invent kayak fishing but there sure is a whole lot of talking here about one of the simplest things you need for kayak fishing. Isn't simplicity one of the top ten reason people got into kayak fishing???

We are talking about a stake out pole here guys/gals!! Pretty simple item. I have had my $1.50 (probably less) pvc stake out pole for 2 years now and have never had a problem. It has never broken, not held the yak, not stuck in the ground, etc. I just cut a section from a piece laying around the garage and glued a "T" on the top, like I said pretty simple.

For those that have the fancy high $$$ pole from Capt Dick, congrats on your purchase. I just am shaking my head that we can have a 2 page and running thread with close to 200 views and almost 20 replies on a simple stake out pole. Am I missing something??? Is it that complicated???

Posted: Tue Jun 14, 2005 2:32 pm
by justabucup
Together, it is indestructible
Call Trump I think we have the material for the new World Trade Center!

Posted: Tue Jun 14, 2005 2:35 pm
by loukiii
I just cut a section from a piece laying around the garage and glued a "T" on the top
What does the "T" stand for? Toddle? Maybe you should give buc one for his van.

Posted: Tue Jun 14, 2005 2:47 pm
by Todd
loukiii wrote:What does the "T" stand for?

Image

Posted: Tue Jun 14, 2005 3:04 pm
by TroutTracker
Mark
I don't like running the stakeout pole through the scuppers when I'm in the yak, I will if I get out and wade.

I like to be able to hook the stakeout pole to the trolley and position myself wherever i want.

stakeout pole

Posted: Wed Sep 21, 2005 1:45 pm
by Redmandan
wallyword has a aluminum walking stick aka stakeout pole retracks in three sections with lanyard twist locks, swiss army brand $10.00 works great

Posted: Thu Sep 22, 2005 10:21 am
by ozmo
Just to add to the simplicity thread,

I use my old ski pole with a clip attached and some line. Definitely doesn't bend. Holds really well. Haven't found a downside yet. Cost basically 0 since it was my backup set of poles and I never get to ski anymore. I just cut the basket at the end off.

Ken

Posted: Thu Sep 22, 2005 2:28 pm
by Snukerfreak
What Ozmo said. No use for downhill ski equipment in FL. Bingo, two stakeout poles, $0. They are aluminum and will not wear out. They even have a ergonomic handle grip at the top.

Posted: Thu Jan 12, 2006 10:03 pm
by Sledford
I made a PVC pole with a wood dowel onside and a T handle on the top. It was hard to drive into the ground. The Capt. Dick's pole is pricey $14.00 a foot :shock: but it is the last one you will ever buy. I bet you don't fish with a $29.00 rod.

Posted: Thu Jan 12, 2006 10:21 pm
by FishingDL
Rik - If we all chipped in and bought you a capt. dicks stakeout pole would you get rid of that damn avatar?

Posted: Sat Jan 14, 2006 10:45 am
by Skeeter
I bought a surf rod blank for about $25. Cut it down to 5', sealed the small end with silicone and a stainless pan head screw. Added a foam rod handle and rubber cap on the larger end.
Its stiff enough to hold and it floats if you drop it, about $30 total.

Posted: Thu Mar 30, 2006 1:45 pm
by wardster
Made mine last week. 1/2 inch pvc with 1/2 inch dowel rod inside. I had to do some sanding to get the rod to fit, but it's snug. Looks pretty sturdy, but I can put a bow in her if I try.
I can't complain for $3.00 or less...
Will test her this weekend. I am thinking about making another at 3/4 an inch, but may not have to......

Posted: Thu Mar 30, 2006 2:10 pm
by Gatorlane77
ozmo wrote:Just to add to the simplicity thread,

I use my old ski pole with a clip attached and some line. Definitely doesn't bend. Holds really well. Haven't found a downside yet. Cost basically 0 since it was my backup set of poles and I never get to ski anymore. I just cut the basket at the end off.

Ken
Whatcha doin with the other pole? :wink:

Posted: Mon May 29, 2006 9:45 pm
by Fishwhistler
I got an twist lock extendable paint handle with nice rubber grip for my stake out pole. Its aluminum and plastic. works like a charm.