I am going to mount my 540S garmin color gps on my Pro Angler. I want the wires to go into the hull clean and hidden. Here is my thought. I will be putting the GPS on the Black molded piece on the right side of the hull. I want to run the wiring under it and into the side of the hull. I will then take the wiring all the way to the back hatch where a battery will be custom cut installed into the tackle box they give with the kayak in the very back hatch.
My question is I need a little larger holes to fit the plugs through the hull. My problem is the plugs are bigger than the wiring of course. I will have two of them to fit through. I want the hole then sealed and look professional after it is all wired in.
what can I do after I drill these holes and run the wires so it does not look backyard.
Need a idea for rigging a gps fishfinder on my Pro Angler.
- size matters
- Posts: 115
- Joined: Tue May 24, 2011 8:08 am
- Location: Englewood, Florida
Need a idea for rigging a gps fishfinder on my Pro Angler.
"President of the Dink Fishing Club"
Re: Need a idea for rigging a gps fishfinder on my Pro Angle
Google up rubber grommet
Those big damn plugs have been a problem for boat riggers for years
Those big damn plugs have been a problem for boat riggers for years
Over every mountain there is a path, although it may not be seen from the valley
- size matters
- Posts: 115
- Joined: Tue May 24, 2011 8:08 am
- Location: Englewood, Florida
Re: Need a idea for rigging a gps fishfinder on my Pro Angle
west marine carry anything like this? I like my stuff to look good.
"President of the Dink Fishing Club"
-
- Posts: 1006
- Joined: Fri Aug 10, 2007 10:47 am
- Location: Lakeland, Poke County FL
Re: Need a idea for rigging a gps fishfinder on my Pro Angle
Check out your local auto parts store too, thats where I got mine from.
Kevin
"Am I missing and eyebrow?" - Adam Savage
"Am I missing and eyebrow?" - Adam Savage
- size matters
- Posts: 115
- Joined: Tue May 24, 2011 8:08 am
- Location: Englewood, Florida
Re: Need a idea for rigging a gps fishfinder on my Pro Angle
I found some here at work out of a jeep that should work well. Thanks for the ideas-Ken
"President of the Dink Fishing Club"
Re: Need a idea for rigging a gps fishfinder on my Pro Angle
http://kayakfishinggear.com/38liquidtitefitting.aspx" onclick="window.open(this.href);return false;
Searches for wire seal or cable clam will get you other options
Searches for wire seal or cable clam will get you other options
Sawyer Paddles and Oars